Changing the system time on Avaya IP Office

Changing the system time on Avaya IP Office

This action must be performed from a phone that has level 2 administrator rights.
  1. First Press the Feature key then Press the downward arrow until you see Phone User on the display and press the Select button.
  2. Next Press the downward arrow until you see System Admin on the display and then press the Select button.
  3. Press the downward arrow until you see Time on the display and press Select or OK.
  4. Enter the correct time on the keypad using the 24 hour clock format using the * key for the colon and then press the Done soft key. For example, if the correct time is 13:20 then enter the following on the keypad 13*20.
  5. Next Press the downward arrow until you see Date on the display and press the Select button.
  6. Enter the correct date on the keypad (date format is dd/mm/yy) using the * key as the separator between each section and press the Done soft key.

    • Related Articles

    • Avaya IP Office: Block Specific Incoming Caller IDs

      This How-To covers blocking a specific number from being able to get through your Incoming Call Routes on an Avaya IP Office. This guide is based around release 9.1, but it also covers earlier releases. Step 1: Create A New Incoming Call Route Go to ...
    • IP Office 1408 1416 User Guide

      Avaya 1408 and 1416 Telephones - connected to Integral Enterprise - User Guide 16-603463 Issue 1.09 January 2010 © 2009 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure that the information in this document was ...
    • IP Office 1408 1416 Quick Reference Guide

      IP Office 1408/1416 Quick Reference Issue 1 Redialing a Previous Number Press Redial. Use the up/down cursor to scroll through the calls. To call the highlighted contact, press Call. Calling from Your Call Log You can use your call history to make ...
    • Troubleshooting IP Phone Connectivity Issues with SmartPBX

      Troubleshooting IP Phone Connectivity Issues with SmartPBX If your IP phone is experiencing connectivity issues with SmartPBX, use this troubleshooting guide to identify and resolve the problem. Follow the steps below to ensure a successful ...
    • Mitel 5540 IP Console - Switch Absent Mode

      Changing the Attendant Present/Absent Status You can change the Attendant status to "Absent" when you plan to be away from your desk and want calls to the console directed to an alternate answering position. To change the Attendant Present/Absent ...